Hydraulic 2-Color/Dissimilar Material IMM

DC Series

Clamping force:

120~200ton (132~220USton)

Hydraulic

Direct

TACT3

  • Hydraulic
  • Horizontal
  • 2-Piston Mold Clamping System
  • Double Injection

INQUIRY & QUOTATION

MODELS & SPECS

Double Injection Molding Machine

Molding of 2-color molded products, which are widely used in industrial and household products, can be done by one machine with higher cycle and at lower cost.

It excels in manifesting precision, strength, and gloss in the products.

Dissimilar material molding of hard and soft (Elastomer) resins is also possible.

Key Features

 

  • Servomotor-driven high-speed shock-less rotation mechanism

  • 2-color molding by DC type core rotation method

  • Rotation during mold opening

  • High-speed mold opening

  • Faster injection time

  • 2-piston type high-precision mold clamping system

  • Larger mold mounting capability

  • Faster screw rotation & plasticization

  • High-performance user-friendly TACT Controller

Models & Specs (US Specs)

DC120

DC250

Item

Unit

9A (A: 9A & B: 9A)

Screw diameter

 

inch

(mm)

1.10

(28)

1.26

(32)

1.42

(36)

Injection capacity

 

 

inch3

(cm3)

(oz)

4.2

(69)

(2.3)

5.5

(90)

(3.0)

7.0

(114)

(3.8)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

35410

(244)

(2490)

27090

(187)

(1905)

21400

(147)

(1505)

Clamping force

 

 

USton

(kN)

(tf)

132

(1190)

(120)

Clamping stroke

 

inch

(mm)

17.7

(450)

Min. mold thickness

 

inch

(mm)

6.7

(170)

Max. daylight opening

 

inch

(mm)

24.4

(620)

Tie bar clearance (H×V)

 

inch

(mm)

26.0x9.9

(660x250)

Die plate dimensions (H×V)

 

inch

(mm)

31.5x18.9

(800x480)

Ejector stroke

 

inch

(mm)

3.9

(100)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

● Injection unit: operator side=A and non-operator side=B

Item

Unit

25A (A: 25A & B: 25A)

Screw diameter

 

inch

(mm)

1.57

(40)

1.77

(45)

1.97

(50)

Injection capacity

 

 

inch3

(cm3)

(oz)

12.3

(201)

(6.7)

15.5

(254)

(8.5)

19.2

(314)

(10.5)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

31860

(219)

(2240)

25170

(173)

(1770)

20410

(140)

(1435)

Clamping force

 

 

USton

(kN)

(tf)

220

(1990)

(200)

Clamping stroke

 

inch

(mm)

20.5

(520)

Min. mold thickness

 

inch

(mm)

9.9

(250)

Max. daylight opening

 

inch

(mm)

30.3

(770)

Tie bar clearance (H×V)

 

inch

(mm)

36.4x12.0

(925x305)

Die plate dimensions (H×V)

 

inch

(mm)

42.1x22.4

(1070x570)

Ejector stroke

 

inch

(mm)

3.9

(100)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

● Injection unit: operator side=A and non-operator side=B

Copyright © 2017 NISSEI AMERICA, INC. All rights reserved.