Large Hybrid Injection Molding Machine

FVX-III Series

Hybrid

Direct

TACT IV

Clamping force:

561~1306ton (618~1439USton)

INQUIRY & QUOTATION

  • Hybrid (Large-Size)
  • Horizontal
  • Straight Hydraulic Clamping
  • TACT®IV Controller
  • X-Pump System®

MODELS & SPECS

Equipped with the "X-Pump®" System: an innovative hybrid pump system

FVX-Ⅲ Series inherits easy-operability and straight-hydraulic mold clamping advantages of hydraulic injection molding machines while achieving significant energy-savings. FVX-Ⅲ Series with NISSEI original innovative hybrid “X-Pump®” system offers well-balanced performance with its high-rigidity direct-pressure clamping system, excellent injection performance, long service life, easy maintenance, and electric type level of energy efficiency.

It redefines the concept of hydraulic injection molding systems.

Characteristics of X-Pump® equipped FVX-III Series

  • Excellent molding stability
  • Quick response
  • Long-sustained + high-pressure injection holding pressure
  • Wide-ranging injection velocity
  • Low cost
  • Energy-saving
  • Low maintenance
  • Low-noise
  • Easy-to-use direct-pressure type clamping mechanism

Fusion of Hydraulic Control and Servomotor Drive Technologies

Intelligent Hybrid X-Pump® System

with Direct Pressure Type Clamping Unit

The X-Pump System combines years of accumulated expertise in hydraulic and state-of-the-art servomotor drive technologies. Since the servomotor rotates at the required speed only when necessary, the extremely efficient X-Pump achieves drastic energy-savings. Furthermore, with exceptional stability in injection repeatability and controllability in low velocity/pressure range, it makes production of higher-precision and higher-quality molded products possible.

High-Performance & High-Functioning Controller TACT® IV

Larger screen, newly designed operation panel, and convenient & user-friendly premium software are equipped to improve workability & operability, and the quality & production management functions have been reinforced.

 

Sheet switch type is used for the operation panel, and 15-inch vertical LCD can arrange two windows vertically, materializing superior visibility and operability.

 

Molding condition settings to increase yield, which used to require a skilled technician, are automated and simplified.  Its “Easy Setting” permits the reduction of defect rate.

In addition, new features, such as SET-UP screen and display of the descriptions of adjusters, allow saving of preparation time from mold installation to starting of mass production and materialization of easy & reliable operation.

Models & Specs (US Specs)

FVX560III

FVX660III

FVX860III

FVX1100III

FVX1300III

Item

Unit

210L

310L

Screw diameter

 

inch

(mm)

3.1

(80)

3.5

(90)

3.5

(90)

3.9

(100)

Injection capacity

 

 

inch3

(cm3)

(oz)

219

(2110)

(70.7)

163

(2670)

(89.5)

194

(3180)

(107)

240

(3930)

(132)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

27020

(186)

(1900)

21330

(147)

(1500)

26560

(183)

(1870)

21480

(148)

(1510)

Clamping force

 

 

USton

(kN)

(tf)

618

(5500)

(561)

Clamping stroke

 

inch

(mm)

35.4

(900)

Mold thickness (min.-max.)

 

inch

(mm)

15.7~35.4

(400~900)

Max. daylight opening

 

inch

(mm)

71.3

(1810)

Tie bar clearance (H×V)

 

inch

(mm)

38.2x38.2

(970x970)

Die plate dimensions (H×V)

 

inch

(mm)

53.5x53.5

(1360x1360)

Ejector stroke

 

inch

(mm)

7.1

(180)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

310L

400L

Screw diameter

 

inch

(mm)

3.5

(90)

3.9

(100)

3.9

(100)

4.4

(112)

Injection capacity

 

 

inch3

(cm3)

(oz)

194

(3180)

(107)

240

(3930)

(132)

244

(4000)

(134)

306

(5020)

(168)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

26560

(183)

(1870)

21480

(148)

(1510)

24320

(167)

(1710)

19340

(133)

(1360)

Clamping force

 

 

USton

(kN)

(tf)

720

(6390)

(653)

Clamping stroke

 

inch

(mm)

37.4

(950)

Mold thickness (min.-max.)

 

inch

(mm)

17.7~37.4

(450~950)

Max. daylight opening

 

inch

(mm)

75.2

(1910)

Tie bar clearance (H×V)

 

inch

(mm)

43.3x43.3

(1100x1100)

Die plate dimensions (H×V)

 

inch

(mm)

60.6x60.6

(1540x1540)

Ejector stroke

 

inch

(mm)

7.9

(200)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

400L

600L

Screw diameter

 

inch

(mm)

3.9

(100)

4.4

(112)

4.4

(112)

4.9

(125)

Injection capacity

 

 

inch3

(cm3)

(oz)

244

(4000)

(134)

306

(5020)

(168)

367

(6010)

(201)

456

(7480)

(251)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

24320

(167)

(1710)

19340

(133)

(1360)

24890

(171)

(1750)

20050

(138)

(1410)

Clamping force

 

 

USton

(kN)

(tf)

946

(8410)

(858)

Clamping stroke

 

inch

(mm)

46.3

(1175)

Mold thickness (min.-max.)

 

inch

(mm)

19.7~42.3

(500~1075)

Max. daylight opening

 

inch

(mm)

89.0

(2260)

Tie bar clearance (H×V)

 

inch

(mm)

52.4x52.4

(1330x1330)

Die plate dimensions (H×V)

 

inch

(mm)

70.9x70.9

(1800x1800)

Ejector stroke

 

inch

(mm)

7.9

(200)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

600L

Screw diameter

 

inch

(mm)

4.4

(112)

4.9

(125)

Injection capacity

 

 

inch3

(cm3)

(oz)

367

(6010)

(201)

456

(7480)

(251)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

24890

(171)

(1750)

20050

(138)

(1410)

Clamping force

 

 

USton

(kN)

(tf)

1207

(10730)

(1095)

Clamping stroke

 

inch

(mm)

49.2

(1250)

Mold thickness (min.-max.)

 

inch

(mm)

23.6~45.3

(600~1150)

Max. daylight opening

 

inch

(mm)

94.9

(2410)

Tie bar clearance (H×V)

 

inch

(mm)

55.1x55.1

(1400x1400)

Die plate dimensions (H×V)

 

inch

(mm)

78.0x78.0

(1980x1980)

Ejector stroke

 

inch

(mm)

7.9

(200)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

700L

1100L*

Screw diameter

 

inch

(mm)

4.7

(112)

5.3

(135)

4.9

(125)

5.5

(140)

5.9

(150)

Injection capacity

 

 

inch3

(cm3)

(oz)

428

(7010)

(235)

541

(8870)

(297)

535

(8774)

(294)

672

(11006)

(369)

771

(12635)

(423)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

24460

(168)

(1720)

19340

(133)

(1360)

29150

(201)

(2050)

23180

(160)

(1630)

20340

(140)

(1430)

Clamping force

 

 

USton

(kN)

(tf)

1439

(12800)

(1306)

Clamping stroke

 

inch

(mm)

51.2

(1300)

Mold thickness (min.-max.)

 

inch

(mm)

27.6~49.2

(700~1250)

Max. daylight opening

 

inch

(mm)

100.8

(2560)

Tie bar clearance (H×V)

 

inch

(mm)

57.1x57.1

(1450x1450)

Die plate dimensions (H×V)

 

inch

(mm)

79.5x79.5

(2020x2020)

Ejector stroke

 

inch

(mm)

11.0

(280)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

* These are estimated values for FVX1300III-1100L.  Please contact us for more details.

Copyright © 2017 NISSEI AMERICA, INC. All rights reserved.