All-Electric Injection Molding Machine

NEX-III Series

Clamping force:

15~460ton (16.5~507USton)

Electric

Toggle

TACT IV

  • All-Electric
  • Horizontal
  • Linear Pressure Toggle
  • General-Purpose
  • TACT®IV Controller

INQUIRY & QUOTATION

MODELS & SPECS

The Next Generation of Smart Technology

NISSEI electric injection molding machines have been developed by being in tune with the needs of the field and years of accumulated expertise. Since its debut in 2003, NEX has become one of the best-selling series that have been newly updated and reborn as the NEX-Ⅲ Series.  NEX-Ⅲ Series offers the new further stable plasticization device and TACT® IV controller, which is equipped with a 15-inch large vertically long LCD screen and premium software for better operability and functions, materializing to secure broader moldable range and ensure the quality of molding.

Image of the linear pressure toggle

It possesses the characteristics similar to the direct pressure mechanism, yet it utilizes the advantages of the toggle mechanism…"Linear Pressure Toggle" materialized!

The clamping unit is equipped with a  flat clamp, automatic clamping force adjuster, direct clamping force setting, and high-sensitivity mold protection function. It is a toggle mechanism that is safe to the mold, materializing linear pressure toggle of high-cycle, high-precision, high-rigidity, and high-durability. Thus, it possesses the characteristics similar to the direct pressure mechanism, yet it utilizes the advantages of the toggle mechanism, such as its high-cycle property. In addition, shortening the cycles can easily be achieved by its increased mold open/close and ejector speeds as well as using the simultaneous motions, such as mold open & ejection during metering and injection during clamping.

High-Performance & High-Functioning Controller TACT® IV

Larger screen, newly designed operation panel, and convenient & user-friendly premium software are equipped to improve workability & operability, and the quality & production management functions have been reinforced.

 

Sheet switch type is used for the operation panel, and 15-inch vertical LCD can arrange two windows vertically, materializing superior visibility and operability.

 

Molding condition settings to increase yield, which used to require a skilled technician, are automated and simplified.  Its "Easy Setting" permits the reduction of defect rate.

In addition, new features, such as SET-UP screen and display of the descriptions of adjusters, allow saving of preparation time from mold installation to starting of mass production and materialization of easy & reliable operation.

Image of the all-new plasticization device

New plasticization device with further stability developed!

In order to reduce molding defects, the barrel temperature control zones have been subdivided and optimized to improve plasticization performance. New NEX Series offers improved basic functions, such as higher injection pressure and faster injection speed. Many optional features are also available, such as a selection of high precision specification for 2EG~12EG injection unit classes, which materializes further precise stable molding.

Models & Specs (US Specs)

NEX15III

NEX30III

NEX50III

NEX80III

NEX110III

NEX140III

NEX180III

NEX220III

NEX280III

NEX360III

NEX460III

Item

Unit

2EG (std)

Screw diameter

 

 

 

inch

(mm)

AA

0.55

(14)

A

0.63

(16)

B

0.75

(19)

Injection capacity

 

 

inch3

(cm3)

(oz)

0.5

(8)

(0.3)

0.8

(13)

(0.4)

1.1

(18)

(0.6)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

32649

(225)

(2295)

38452

(265)

(2704)

28440

(196)

(2000)

Clamping force

 

 

USton

(kN)

(tf)

16.5

(147)

(15)

Clamping stroke

 

inch

(mm)

6.3

(160)

Mold thickness (min-max)

 

inch

(mm)

5.1~10.2

(130~260)

Max. daylight opening

 

inch

(mm)

16.5

(420)

Tie bar clearance (H×V)

 

inch

(mm)

10.2x10.2

(260x260)

Die plate dimensions (H×V)

 

inch

(mm)

14.6x14.6

(370x370)

Ejector stroke

 

inch

(mm)

2.0

(50)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

2EG (std)

3EG

Screw diameter

 

 

 

inch

(mm)

A

0.63

(16)

B

0.75

(19)

A

0.75

(19)

B

0.87

(22)

Injection capacity

 

 

inch3

(cm3)

(oz)

0.8

(13)

(0.4)

1.1

(18)

(0.6)

1.4

(23)

(0.8)

2.1

(35)

(1.2)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

38452

(265)

(2704)

28440

(196)

(2000)

38452

(265)

(2704)

30430

(210)

(2140)

Clamping force

 

 

USton

(kN)

(tf)

33

(294)

(30)

Clamping stroke

 

inch

(mm)

9.1

(230)

Mold thickness (min-max)

 

inch

(mm)

5.9~12.0

(150~305)

Max. daylight opening

 

inch

(mm)

21.1

(535)

Tie bar clearance (H×V)

 

inch

(mm)

12.2x12.2

(310x310)

Die plate dimensions (H×V)

 

inch

(mm)

17.7x17.7

(450x450)

Ejector stroke

 

inch

(mm)

2.0

(50)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

3EG

5EG (std)

Screw diameter

 

 

 

inch

(mm)

A

0.75

(19)

B

0.87

(22)

A

0.87

(22)

B

1.02

(26)

BB

1.10

(28)

Injection capacity

 

 

inch3

(cm3)

(oz)

1.4

(23)

(0.8)

2.1

(35)

(1.2)

2.1

(35)

(1.2)

3.0

(49)

(1.6)

3.5

(57)

(1.9)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

38452

(265)

(2704)

30430

(210)

(2140)

40629

(280)

(2857)

28440

(196)

(2000)

24530

(169)

(1725)

Clamping force

 

 

USton

(kN)

(tf)

55

(490)

(50)

Clamping stroke

 

inch

(mm)

9.8

(250)

Mold thickness (min-max)

 

inch

(mm)

6.7~14.2

(170~360)

Max. daylight opening

 

inch

(mm)

24.0

(610)

Tie bar clearance (H×V)

 

inch

(mm)

14.2x14.2

(360x360)

Die plate dimensions (H×V)

 

inch

(mm)

19.9x19.9

(505x505)

Ejector stroke

 

inch

(mm)

2.8

(70)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

5EG

9EG (std)

12EG

Screw diameter

 

 

 

inch

(mm)

A

0.87

(22)

B

1.02

(26)

BB

1.10

(28)

AA

1.02

(26)

A

1.10

(28)

B

1.26

(32)

AA

1.10

(28)

A

1.26

(32)

B

1.42

(36)

Injection capacity

 

 

inch3

(cm3)

(oz)

2.1

(35)

(1.2)

3.0

(49)

(1.6)

3.5

(57)

(1.9)

3.3

(54)

(1.8)

4.2

(69)

(2.3)

5.5

(90)

(3.0)

4.2

(69)

(2.3)

6.2

(101)

(3.4)

7.7

(127)

(4.3)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

40629

(280)

(2857)

28440

(196)

(2000)

24530

(169)

(1725)

40629

(280)

(2857)

35270

(243)

(2480)

27020

(186)

(1900)

40629

(280)

(2857)

32420

(223)

(2280)

25683

(177)

(1806)

Clamping force

 

 

USton

(kN)

(tf)

88

(784)

(80)

Clamping stroke

 

inch

(mm)

11.8

(300)

Mold thickness (min-max)

 

inch

(mm)

7.9~15.2

(200~385)

Max. daylight opening

 

inch

(mm)

27.0

(685)

Tie bar clearance (H×V)

 

inch

(mm)

16.5x16.5

(420x420)

Die plate dimensions (H×V)

 

inch

(mm)

22.8x22.8

(580x580)

Ejector stroke

 

inch

(mm)

3.0

(75)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

9EG

12EG (std)

18E

Screw diameter

 

 

 

inch

(mm)

AA

1.02

(26)

A

1.10

(28)

B

1.26

(32)

AA

1.10

(28)

A

1.26

(32)

B

1.42

(36)

AA

1.26

(32)

A

1.42

(36)

B

1.57

(40)

Injection capacity

 

 

inch3

(cm3)

(oz)

3.3

(54)

(1.8)

4.2

(69)

(2.3)

5.5

(90)

(3.0)

4.2

(69)

(2.3)

6.2

(101)

(3.4)

7.7

(127)

(4.3)

7.1

(117)

(3.9)

9.0

(148)

(5.0)

11.1

(182)

(6.1)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

40629

(280)

(2857)

35270

(243)

(2480)

27020

(186)

(1900)

40629

(280)

(2857)

32420

(223)

(2280)

25683

(177)

(1806)

40048

(276)

(2816)

31570

(218)

(2220)

25683

(177)

(1806)

Clamping force

 

 

USton

(kN)

(tf)

121

(1080)

(110)

Clamping stroke

 

inch

(mm)

13.8

(350)

Mold thickness (min-max)

 

inch

(mm)

8.7~16.1

(220~410)

Max. daylight opening

 

inch

(mm)

29.9

(760)

Tie bar clearance (H×V)

 

inch

(mm)

18.1x18.1

(460x460)

Die plate dimensions (H×V)

 

inch

(mm)

25.5x25.5

(647x647)

Ejector stroke

 

inch

(mm)

3.3

(85)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

12EG

18E (std)

25E

Screw diameter

 

 

 

inch

(mm)

AA

1.10

(28)

A

1.26

(32)

B

1.42

(36)

AA

1.26

(32)

A

1.42

(36)

B

1.57

(40)

AA

1.42

(36)

A

1.57

(40)

B

1.77

(45)

Injection capacity

 

 

inch3

(cm3)

(oz)

4.2

(69)

(2.3)

6.2

(101)

(3.4)

7.7

(127)

(4.3)

7.1

(117)

(3.9)

9.0

(148)

(5.0)

11.1

(182)

(6.1)

9.9

(163)

(5.5)

12.3

(201)

(6.7)

15.5

(254)

(8.5)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

40629

(280)

(2857)

32420

(223)

(2280)

25683

(177)

(1806)

40048

(276)

(2816)

31570

(218)

(2220)

25683

(177)

(1806)

37872

(261)

(2663)

30580

(211)

(2150)

24250

(167)

(1705)

Clamping force

 

 

USton

(kN)

(tf)

154

(1373)

(140)

Clamping stroke

 

inch

(mm)

15.7

(400)

Mold thickness (min-max)

 

inch

(mm)

8.7~17.7

(220~450)

Max. daylight opening

 

inch

(mm)

33.5

(850)

Tie bar clearance (H×V)

 

inch

(mm)

20.1x18.1

(510x460)

Die plate dimensions (H×V)

 

inch

(mm)

28.3x26.4

(720x670)

Ejector stroke

 

inch

(mm)

4.3

(110)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

18E

25E (std)

36E (std)

Screw diameter

 

 

 

inch

(mm)

AA

1.26

(32)

A

1.42

(36)

B

1.57

(40)

AA

1.42

(36)

A

1.57

(40)

B

1.77

(45)

AA

1.57

(40)

A

1.77

(45)

B

1.97

(50)

Injection capacity

 

 

inch3

(cm3)

(oz)

7.1

(117)

(3.9)

9.0

(148)

(5.0)

11.1

(182)

(6.1)

9.9

(163)

(5.5)

12.3

(201)

(6.7)

15.5

(254)

(8.5)

13.8

(226)

(7.6)

17.5

(286)

(9.6)

21.5

(353)

(11.8)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

40048

(276)

(2816)

31570

(218)

(2220)

25683

(177)

(1806)

37872

(261)

(2663)

30580

(211)

(2150)

24250

(167)

(1705)

37727

(260)

(2653)

29860

(206)

(2100)

24250

(167)

(1705)

Clamping force

 

 

USton

(kN)

(tf)

198

(1765)

(180)

Clamping stroke

 

inch

(mm)

17.7

(450)

Mold thickness (min-max)

 

inch

(mm)

9.8~20.1

(250~510)

Max. daylight opening

 

inch

(mm)

37.8

(960)

Tie bar clearance (H×V)

 

inch

(mm)

22.0x22.0

(560x560)

Die plate dimensions (H×V)

 

inch

(mm)

31.5x31.5

(800x800)

Ejector stroke

 

inch

(mm)

4.3

(110)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

50E (std)

71E

Screw diameter

 

 

 

inch

(mm)

AA

1.77

(45)

A

1.97

(50)

B

2.20

(56)

AA

1.97

(50)

A

2.20

(56)

B

2.48

(63)

Injection capacity

 

 

inch3

(cm3)

(oz)

19.9

(326)

(10.9)

24.6

(403)

(13.5)

30.8

(505)

(16.9)

27.0

(442)

(14.8)

33.8

(554)

(18.6)

42.8

(701)

(23.5)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

36275

(250)

(2551)

29308

(202)

(2061)

23364

(161)

(1643)

36120

(249)

(2540)

28870

(199)

(2030)

22750

(157)

(1600)

Clamping force

 

 

USton

(kN)

(tf)

242

(2160)

(220)

Clamping stroke

 

inch

(mm)

20.9

(530)

Mold thickness (min-max)

 

inch

(mm)

10.8~22.0

(275~560)

Max. daylight opening

 

inch

(mm)

42.9

(1090)

Tie bar clearance (H×V)

 

inch

(mm)

23.2x23.2

(590x590)

Die plate dimensions (H×V)

 

inch

(mm)

33.5x33.5

(850x850)

Ejector stroke

 

inch

(mm)

4.7

(120)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

71E (std)

100LE

Screw diameter

 

 

 

inch

(mm)

AA

1.97

(50)

A

2.20

(56)

B

2.48

(63)

AA

1.97

(50)

A

2.20

(56)

B

2.48

(63)

Injection capacity

 

 

inch3

(cm3)

(oz)

27.0

(442)

(14.8)

33.8

(554)

(18.6)

42.8

(701)

(23.5)

33.6

(550)

(18.4)

47.4

(776)

(26.0)

59.9

(982)

(32.9)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

36120

(249)

(2540)

28870

(199)

(2030)

22750

(157)

(1600)

36120

(249)

(2540)

28870

(199)

(2030)

22750

(157)

(1600)

Clamping force

 

 

USton

(kN)

(tf)

309

(2740)

(280)

Clamping stroke

 

inch

(mm)

23.6

(600)

Mold thickness (min-max)

 

inch

(mm)

12.6~24.0

(320~610)

Max. daylight opening

 

inch

(mm)

47.6

(1210)

Tie bar clearance (H×V)

 

inch

(mm)

26.0x26.0

(660x660)

Die plate dimensions (H×V)

 

inch

(mm)

37.6x37.6

(955x955)

Ejector stroke

 

inch

(mm)

5.1

(130)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

100LE (std)

140LE

Screw diameter

 

 

 

inch

(mm)

AA

1.97

(50)

A

2.20

(56)

B

2.48

(63)

A

2.48

(63)

B

2.80

(71)

Injection capacity

 

 

inch3

(cm3)

(oz)

33.6

(550)

(18.4)

47.4

(776)

(26.0)

59.9

(982)

(32.9)

67.5

(1107)

(37.1)

85.8

(1406)

(47.1)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

36120

(249)

(2540)

28870

(199)

(2030)

22750

(157)

(1600)

29150

(201)

(2050)

22900

(158)

(1610)

Clamping force

 

 

USton

(kN)

(tf)

397

(3530)

(360)

Clamping stroke

 

inch

(mm)

25.6

(650)

Mold thickness (min-max)

 

inch

(mm)

13.8x27.2

(350~690)

Max. daylight opening

 

inch

(mm)

52.8

(1340)

Tie bar clearance (H×V)

 

inch

(mm)

28.9x28.9

(735x735)

Die plate dimensions (H×V)

 

inch

(mm)

41.5x41.5

(1055x1055)

Ejector stroke

 

inch

(mm)

5.9

(150)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Item

Unit

140LE (std)

210LE

Screw diameter

 

 

 

inch

(mm)

A

2.48

(63)

B

2.80

(71)

A

3.10

(80)

B

3.50

(90)

Injection capacity

 

 

inch3

(cm3)

(oz)

67.5

(1107)

(37.1)

85.8

(1406)

(47.1)

128.8

(2111)

(70.7)

163.0

(2672)

(89.5)

Max. injection pressure

 

 

psi

(MPa)

(kgf/cm2)

29150

(201)

(2050)

22900

(158)

(1610)

27020

(186)

(1900)

21330

(147)

(1500)

Clamping force

 

 

USton

(kN)

(tf)

507

(4510)

(460)

Clamping stroke

 

inch

(mm)

31.5

(800)

Mold thickness (min-max)

 

inch

(mm)

14.8x30.3

(375~770)

Max. daylight opening

 

inch

(mm)

61.8

(1570)

Tie bar clearance (H×V)

 

inch

(mm)

32.3x32.3

(820x820)

Die plate dimensions (H×V)

 

inch

(mm)

46.9x46.9

(1190x1190)

Ejector stroke

 

inch

(mm)

6.3

(160)

● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.

● NISSEI is not responsible for any inaccuracies contained herein.

● Please consult our sales representative or NISSEI regional offices before designing a mold.

● Actual plasticizing capacity may vary, depending on the molding conditions and material used.

Copyright © 2017 NISSEI AMERICA, INC. All rights reserved.