TH-E Ⅳ Series
VERTICAL ALL-ELECTRIC TYPE INJECTION MOLDING MACHINE
Clamping force: 20~80 ton (22~88 USton)
- All-Electric
- Vertical
- Single-Stage Type
- Ideal for Thin-Hoop Molding
- IoT-Enabeld TACT® 5 Controller
All-electric type vertical injection molding machine TH-E Series is ideal for high-cycle thin hoop molding. It is equipped with the IoT-enabled TACT® 5 Controller, taking its convenience and user-friendliness to a whole new level. It offers the advantages of electric type machines backed by NISSEI's abundant experience in time-tested hydraulic type vertical injection molding technologies. It materializes excellent workability, operability, energy-efficiency, clean performance, high-precision control, and high-cycle molding.
"Supporting Digital Transformation (DX) of Injection Molding Machines"
TH-EⅣ Series can function as a hub, which connects devices and equipment in a factory. By visualizing the operation status of each device and collaborating with other equipment and people, an efficient smart factory can be materialized. TH-EⅣ Series machines are newly designed to make molding operation intuitive for both current NISSEI users and first-time users.
"To Be a Hub for the Molding Factory"
OPC-UA, which is a communication standard widely used throughout the world to network controllers, comes standard in TH-EⅣ Series. The machine, various auxiliary equipment, and MES can be networked. Data collected in the molding machine can be displayed on TACT screen.
| Item | Unit | 2VE | ||
|---|---|---|---|---|
| Screw diameter | inch (mm) | 0.63 (16) | 0.75 (19) | |
| Injection capacity | inch3 (cm3) (oz) | 0.8 (13) (0.4) | 1.1 (18) (0.6) | |
| Max. injection pressure | psi (MPa) (kgf/cm2) | 36970 (255) (2600) | 28440 (196) (2000) | |
| Clamping force | USton (kN) (tf) |
22 (196) (20) |
||
| Clamping stroke | inch (mm) |
7.9 (200) |
||
| Mold thickness (min-max) | inch (mm) |
6.7~10.6 (170~270) |
||
| Max. daylight opening | inch (mm) |
18.5 (470) |
||
| Tie bar clearance (H×V) | inch (mm) |
12.2x12.2 (310x310) |
||
| Die plate dimensions (H×V) | inch (mm) |
18.1x18.1 (460x460) |
||
| Ejector stroke | inch (mm) |
1.6 (40) |
||
| Item | Unit | 5VE | ||
|---|---|---|---|---|
| Screw diameter | inch (mm) | 0.75 (19) | 0.87 (22) | 1.02 (26) |
| Injection capacity | inch3 (cm3) (oz) | 1.4 (23) (0.8) | 2.1 (35) (1.2) | 3.0 (49) (1.6) |
| Max. injection pressure | psi (MPa) (kgf/cm2) | 38400 (265) (2700) | 36970 (255) (2600) | 28440 (196) (2000) |
| Clamping force | USton (kN) (tf) |
44 (392) (40) |
||
| Clamping stroke | inch (mm) |
9.4 (240) |
||
| Mold thickness (min-max) | inch (mm) |
9.5~11.4 (190~290) |
||
| Max. daylight opening | inch (mm) |
20.9 (530) |
||
| Tie bar clearance (H×V) | inch (mm) |
14.2x14.2 (360x360) |
||
| Die plate dimensions (H×V) | inch (mm) |
20.5x20.5 (520x520) |
||
| Ejector stroke | inch (mm) |
1.6 (40) |
||
| Item | Unit | 5VE | | | 9VE | |||
|---|---|---|---|---|---|---|---|
| Screw diameter | inch (mm) | 0.75 (19) | 0.87 (22) | 1.02 (26) | | | 1.10 (28) | 1.26 (32) |
| Injection capacity | inch3 (cm3) (oz) | 1.4 (23) (0.8) | 2.1 (35) (1.2) | 3.0 (49) (1.6) | | | 4.2 (69) (2.3) | 5.5 (90) (3.0) |
| Max. injection pressure | psi (MPa) (kgf/cm2) | 38400 (265) (2700) | 36970 (255) (2600) | 28440 (196) (2000) | | | 35270 (243) (2480) | 27020 (186) (1900) |
| Clamping force | USton (kN) (tf) |
77 *(88) (686) *(784) (70) *(80) |
|||||
| Clamping stroke | inch (mm) |
9.8 (250) |
|||||
| Mold thickness (min-max) | inch (mm) |
9.1~13.8 (230~350) |
|||||
| Max. daylight opening | inch (mm) |
23.6 (600) |
|||||
| Tie bar clearance (H×V) | inch (mm) |
16.5x16.5 (420x420) |
|||||
| Die plate dimensions (H×V) | inch (mm) |
23.9x23.9 (607x607) |
|||||
| Ejector stroke | inch (mm) |
2.4 (60) |
|||||
● Specifications apply to U.S. machines only.
● All specs and dimensions are subject to change without notice or may differ depending on export destinations and manufactured year.
● NISSEI is not responsible for any inaccuracies contained herein.
● Please consult our sales representative or NISSEI regional offices before designing a mold.
● Actual plasticizing capacity may vary, depending on the molding conditions and material used.
● *Clamping force of TH70EⅢ can be increased to 784kN (80tf) (optional).
